Comparisons and decisions
LUMNEX / ARTICLE 095 / SINGAPORE
P1.5 vs P2.5 LED Wall: How to Compare
Compare P1.5 and P2.5 indoor LED walls by viewing distance, image detail, room size, maintenance and planning needs.
3 min read
Choosing between a P1.5 vs P2.5 LED wall is mainly a decision about how close people will stand, how much fine detail the screen must show, and how the wall will fit the room. For Singapore offices, showrooms, reception areas and control spaces, the best choice depends on the viewing experience rather than the smallest available pixel pitch.
SECTION / 01
P1.5 vs P2.5 LED wall: what pixel pitch changes
Pixel pitch is the distance between the centres of neighbouring LED pixels. A smaller pitch places pixels more closely together, which can support a finer-looking image when viewers are near the screen. A larger pitch can be appropriate when the audience is farther away and does not need to inspect small text or detailed graphics from close range. The suitable viewing distance should be assessed with the content, screen size and room layout together, not from pixel pitch alone. [3]
Have a room photo or floor plan? Send it on WhatsAppSECTION / 02
Match the wall to content and viewing distance
P1.5 is generally worth considering when the wall will be viewed at relatively close range, or when presentations, dashboards, text and detailed visuals need to remain comfortable to read. P2.5 may be a practical direction for rooms where the audience usually stands or sits farther back and the content is designed for broader visual impact. Before deciding, mark the nearest regular viewing position and review the smallest text, diagrams or interface elements that the screen must display. A site assessment can also confirm whether sightlines, ambient light and the proposed wall dimensions support the intended use.
Have a room photo or floor plan? Send it on WhatsAppSECTION / 03
Installation and long-term operation
The comparison should also include how the wall will be installed and managed. Both options require suitable mounting, signal planning, access for servicing and coordination with the building’s electrical arrangements. Electrical loading and connection details should be confirmed against the selected system and site conditions rather than assumed from the pixel pitch. [5] Content should be tested on the actual wall, and calibration should be planned so that brightness and colour remain consistent across modules. [4] Ask for a clear scope covering the display, control equipment, mounting approach, commissioning and future access before approving the design.
Have a room photo or floor plan? Send it on WhatsAppAPPLY THIS TO YOUR PROJECT
Ready to turn the guidance into a room brief?
Use the related Lumnex route to move from research to the next practical decision.Read the pixel-pitch guideSOURCES USED IN THIS NOTE
Next step
Bring the room
into the brief.
If you are unsure which pitch fits your room, share the screen size, nearest viewing distance and main content types with Lumnex, then use the indoor LED wall pixel pitch guide to prepare a more focused enquiry.
